Engineered by
Precision Surfacing Solutions

Lapping/Polishing Pads & Accessories

Felt and Neoprene Sponge Rubber Pad

Lapping / Polishing Pads & Accessories

A felt or sponge pad is used to absorb thickness variations in a load of components within a conditioning ring when using a full size pressure plate. The pad maintains uniform pressure to all components instead of just the tallest components. The maximum variation in component height that the pads will control is approximately .008” to .010”. The pad also protects the top surface of the components from abrasion caused by contact with the pressure plate. Sponge pads are preferred because they don’t soak up slurry and loose compliance. Sponge pads can also be washed to keep them free of excess waste build-up.  

 All Lapmaster single side machines through the Model 48 are shipped with a set of felt or sponge rubber pads. The pads for the Model 12 and 15 are 12mm thick. PSA adhesive backed pads can also be provided. The adhesive will cause the pad to adhere to the pressure plate. This condition is sometimes preferred because of the savings in operator effort.

Ceramic Workholder – known as ‘studs’

Lapmaster sells a package of 100 white alumina ceramic pads. The size of the pads, which are in the shape of a ring, are 1” outside diameter, 11/16” inside diameter by 1/8” thick. If there is not enough space on small workholders for the entire ring, the ring can be broken and segments can be glued in place.

Polishing Pads 

A polishing pad is a thin disc of fabric or synthetic adhered to the flat surface of a polishing plate. It is used to produce the highest quality scratch free reflective surface finishes using diamond abrasive or chemical polishing agents. Polishing with a pad is considered a “soft polishing” technique because pad materials always have some amount of compliance. The thickness and hardness of the pad determines the compliance. Thicker, softer pads allow the components to sink down into the pad, which produces a radius at the contact edge circumference. The radius or “edge dubbing” prevents the component from being polished flat from edge to edge.

Polishing Pad Recommendations

Selecting the most appropriate polishing pad for an application requires experience and knowledge. This is why Lapmaster operates an applications laboratory to develop processes for machining customer's components. Prior to recommending a specific polishing pad it is suggested that Lapmaster be consulted with the application data so that our experience can be used to select the most appropriate pad.

Lapmaster offers a variety of the more common soft polishing pads in diameters up to 36 inches (914.4mm). Larger diameters generally cannot be supplied in one piece because the manufacturers do not produce the pad materials in a width any wider than 36 inches. Larger diameter pads are usually made in two or three pieces, but this poses difficulty when installing on a polishing plate.

Listed below are the standard polishing pads offered by Lapmaster and some of the more common applications for which they are utilized. By no means is this intended to be an all- inclusive, definitive recommendation chart.Lapmaster Polishing Pads are offered in a wide range of sizes and are made from different types of materials to accommodate almost any polishing application, including Metallographic, petrographic, fiber optics, and many more.

  • Pellon - A low cost, rigid, relatively durable material used for general polishing of metals where surface quality is not extremely precise.
  • Lapmaster Supreme - A long life polyurethane polishing pad. Excellent for final polishing with alumina or colloidal silica. Available with PSA backing only.
  • Suba 500 - A medium cost, very firm polyurethane impregnated polyester felt material used for higher stock removal polishing applications requiring high precision surfaces. Common applications include plated memory discs, aluminum, tungsten, silicon, ceramic, plastic and glass.
  • Polyurethane - A microcellular, rigid foam material impregnated with cerium oxide abrasive. This very hard pad is specifically used for polishing glass where precision flatness is required.
  • Silk - Recommended for rough polishing with diamond. Excellent for friable materials such as coal and petrographic samples. Available with plain backing only.
  • NTR - A soft napped final polishing cloth best used with 6-micron diamond and finer. Available with PSA backing only.
  • Micro LP - 100% pure wool. Recommended for intermediate and final polishing stages with diamond or alumina. Available with PSA backing only
  • ASR - Synthetic silk mounted on a rigid backing. Best results obtained with diamond. Available with PSA backing only
  • Nylon - Napless nylon weave provides excellent finish on most materials. Excellent for flatness and edge retention. Available with plain and PSA backing.
  • PAN-W - Napless, non-woven textile. Excellent for flatness and edge retention. Available with PSA backing only.
  • Velpol - A short nap synthetic velvet. Recommended for final polishing with diamond, alumina or colloidal silica. Available with PSA backing only.
  • Cotton - Recommended for rough polishing with diamond compound. Available with plain backing only.
  • Final Polishing Cloth - A medium nap rayon cloth. Excellent for final polishing with diamond or alumina. Available with plain and PSA backing
  • Selvyt - Medium nap cotton cloth. Excellent for intermediate or final polishing with diamond. Available with plain backing only.
  • Billiard - 100% virgin wool fabric with uniform sheared pile for general rough polishing with Aluminum Oxide powders and suspensions for steels and other ferrous based materials. Available with PSA backing only
  • Blue Final - Fine, short napped high density synthetic cloth. Excellent for final polishing with diamond and colloidal silica.
  • Red Felt - 100% wool. Used on a wide variety of materials. Recommended for intermediate or final polishing with diamond.
  • Imperial - Final polish cloth recommended for softer materials. Excellent with colloidal silica and aluminas.
  • Heavy Nylon - Hard woven cloth pad used to replace some rough grinding steps when used with polycrystalline diamond.
  • Fine Wool - 100% wool cloth. Finer weave for final polishing with diamond.
  • Satin - Durable, synthetic silk style cloth used with diamond for intermediate and final polishing
  • Brown Final - Durable, short nap synthetic used for final polishing with diamond or alumina.


Inquiry Form

* Indicates A Required Field

I read and understood the privacy policy which can be found in the footer of this page.

Precision Surfacing Solutions family of brands
Precision Surfacing Solutions Wheel BrandPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersPrecision Surfacing SolutionsPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersLapmaster WoltersPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersBarnes HoningPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersElb SchliffPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersISOGPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter Woltersaba GrindingPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersReformPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersKehrenPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersMicronPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter WoltersPeter WoltersPSSLapmasterBarnesISOGElbabaReformKehrenMicronPeter Wolters

    PRECISION SURFACING SOLUTIONS supports manufacturers in a wide variety of industries in which precision grinding, lapping, polishing, deburring and advanced materials processing equipment is commonly used. They all need high-quality, high-precision, stable and well-engineered machines to manufacture high-quality work pieces.

    Visit Site
  • Lapmaster Wolters

    Founded in Chicago in 1948 as a manufacture of lapping and polishing machines for the mechanical seal market, Lapmaster has grown to a worldwide solution provider for more than 20 industries like precision optics and advanced materials.

    Visit Site
  • Barnes Honing

    Since 1907 Barnes has been considered a world leader in developing innovative honing and bore finishing technology and processes. The earliest Barnes honing machines were the first to make honing a practical and efficient means of finishing automotive cylinder bores in a production environment.

    Visit Site
  • ISOG

    Since May 2020, the brand ISOG belongs to the globally active Precision Surfacing Solutions Group. With the addition of ISOG to the already existing strong brands within the Group, PSS further strengthens its position as a leading supplier of high quality, best in class technologies in the market of surface quality enhancement solutions.

    Visit Site
  • ELB-Schliff

    ELB-Schliff Werkzeugmaschinen GmbH has been producing surface and profile grinding machines for over 70 years. The company was founded by Edmund Lang in the city of Babenhausen which led to the name "ELB-Schliff".

    Visit Site
  • aba Grinding

    The aba company was founded in 1898 under the name "Messwerkzeugfabrik Alig & Baumgärtel Aschaffenburg", hence the initials aba. Today, the aba Grinding Technologies is exclusively focused on the advancement and production of precision surface and profile grinding machines.

    Visit Site

    REFORM Grinding Technology GmbH is specialized in the sales, development & production of grinding machines for various applications at its location in Aschaffenburg (Germany).

    Visit Site

    Founded in 1934, KEHREN is a well-established designer and builder of high-precision grinding machine tools and systems under the following categories: vertical grinding centers, vertical grinding centers with portal design, surface grinders with rotary tables and horizontal spindles, and surface grinders with dual rotary tables and vertical spindles.

    Visit Site
  • Micron

    Produced in Germany since 2009, MICRON machines are compact and dynamically rigid grinding machines especially designed for Creep Feed and Profile grinding. MICRON is an industry leader in grinding of Hydraulic components like stators, rotors and van pumps.

    Visit Site
  • Peter Wolters

    Founded in Germany in 1804 by Mr. Peter Wolters, Peter Wolters has been producing lapping, polishing and fine grinding equipment since 1936. In 2019 Precision Surfacing Solutions acquired the division Wafer plant and service business for photovoltaic and special materials of Meyer Burger. Further Information can be found at

    Visit Site